GRP Dry-Fix Valley Trough

A Dry Fix System for Slate & Tile Roofs 

                                                                                 

The GRP Dry Valley Over Batten 

This is a mortarless system, which provides maintenance free means of discharging water from the roof. It can be fixed with slates, interlocking and profiled tiles.

The Dry Valley is supplied in 3mt lengths and comes in 2 profiles:

Low Profile 70mm - Generally used with Slates

High Profile 110mm - Generally used with Tiles

They are finished in a standard lead grey colour, and are BBA approved. Eaves and Top Closure pieces are time and cost saving alternatives to traditional mortar and lead.   

The Packs should be stored flat or upright, on a clean, smooth, dry surface; under cover and protected from sunlight.

Dimensions:-    3000mm long x 400mm wide

Pack Size:-        10 per pack

Pack Weight:-   25kg (70mm Low Profile)                    32kg (110mm High Profile)

Material:-           Glass fibre/polyester. UV-resistant

     

The GRP Dry Valley Under Batten

    Again this is a mortarless system. Has all of the same features as the Over Batten design. The Under Batten is just a different way of fixing the product onto the roof. They have the same lead finish colour.

The Under Batten is Supplied in 3 meter lengths and come in 3 profiles: 

Low Profile 55mm - Can be used for Slates

Mid Profile 80mm - Can be used for Standard and Plain Tiles

High Profile 105mm - Can be used for large profiled Tiles.

The Packs should be stored flat or upright, on a clean, smooth, dry surface; under cover and protected from sunlight.

Dimensions:-    3000mm long x 400mm wide

Pack Size:-        10 per pack

Pack Weight:-  55mm Low - (21KG)       80mm Mid - (26kg)       105mm High - (30kg)

Material:-           UV Glass fibre/Polyester laminate 

 

Eaves and Top Closure's ( Over Batten use only )

Eaves  Closure and Top Closures are used for overlaying on the ends of GRP Dry Valleys. Manufactured from a flexible and durable polyurethane, which are a cost-effective alternative to lead and mortar, they will give a clean and professional finish. Images of these can be found in the installation section of the Dry Valleys.

The Dry valley creates a close-cut appearance on new build and refurbished properties, where fixing times can be cut by up to 50% over traditional methods.

As the roofing and building industry continues to move from traditional methods to Dry-Fix methods, the Dry Valley's are products which are approved by NHBC and NFRC, as well as being BBA approved.

When using a Dry Valley, they will give you improved drainage, efficient time savings over traditional mortar methods, along with an improved appearance.

BBA certificate

Dry Valley Trough   BBA Certificate   

Fitting instructions can be viewed by clicking here 

Top