Provides complete continuous cover against water penetration for joints between tiles and brickwork, or bargeboard, at gable ends.
We manufacture Continuous Dry Verge in four profiles, which are available in a range of colours & lengths, 5mt & 6mt, are standard stock lengths.
We produce an 'S' profile, suitable for range of Slates, including Natural Slate, Man Made, Fibre Cement and Interlocking Slates.
We have three profiles (R, D and M), which cover a large range of Concrete and Clay Tiles including: 'Thin Leading Edge Tiles', 'Plain Tiles', 'Rosemary Tiles', 'Low and High Profile' Roof Tiles.
The profiles have an Internal Height, which is the measurement taken from the base of the 'horizontal fin', to the underside of the 'top cover lip' of the verge. To ensure the which verge is to be used, an 'on-site' measurement from the underside of the roof batten to the highest point of the roof tile, will determine which is the best profile to be fitted. Samples of the Dry Verge can be requested through the contact us page.
Pages on Slate Fixing and Tile Fixing show step by step instructions on how to fit the relevant products
Profile - Type 'S'
A continuous dry verge suitable for Slates
MARLEY Melbourne, Rivendale, Birkdale, Garsdale, Thrutone: REDLAND Cambrian: SANDTOFT Britlock, Britslate: NATURAL SLATE Welsh, Spanish, Brazilian, Chinese
Profile - Type R
Internal Height - 86mm
A continuous dry verge suitable for Flat and Low Profiled Tiles
MARLEY Ludlow Major, Modern, Plain Tile: REDLAND Renown, Mini Stonewold, Stonewold MK2, Rosemary Tile, Plain Tile range: SANDTOFT Standard pattern, Calderdale, Lindum, Plain Tile: RUSSELL Cheviot, Grampian, Highland, Plain Tile: FORTICRETE: QUINN: CONDRON.
Profile - Type 'D'
Internal Height - 105mm
A Deeper continuous dry verge suitable for High Profiled Tile
MARLEY Double Roman, Mendip, Anglia: REDLAND Regent, Grovebury, Landmark Double Pantile: SANDTOFT Double Pantile, Double Roman: RUSSEL: QUINN: CONDRON
Profile - Type 'M'
Internal Height - 75mm
A continuous dry verge suitable for Low Profile & Thin Leading Edge Tiles.
It would be advisable that this profile is suitable before fitting, as a type 'R' may be more suitable on some roof tiles.
This website uses 'cookies' to give you the best, most relevant experience. Using this website means you're happy with this. You can find out more about the cookies used by clicking this link.